How to DIY a Professional Finish When Repainting Your Kitchen Cabinets

Painting kitchen cabinets is a big job, and it’s tempting to want to take shortcuts. But if you want a paint job that will look great and stand the test of time, it’s best to take the time and do it right. Here’s how.

You’ll need all the standard painting supplies, like drop cloths, paint rollers, brushes, tape and sandpaper. But the real secret is the paint. Use a self-leveling slow drying paint, such as Benjamin Moore’s Advance, and a mohair roller for a smooth finish. Here are the steps to the whole process.

To turn your dingy old dark cabinets into a light, clean, and bright kitchen only requires a little elbow grease, some patience, and the right tools.

First, label all your doors and drawers. I use a raffle ticket system, as in this photo. DO NOT SKIP THIS STEP! Then remove all the drawers and cabinet doors. You can save a lot of money reusing the hardware if it’s still in good shape. Just collect the knobs and hinges for reattaching later. Set the drawers and doors aside, and work on the boxes first, so you can get your kitchen functioning as soon as possible. Remove dishes and food items from the cabinets, so they don’t get all dusty.

Clean every cabinet surface with Krud Kutter (find it in any home store or grocery) to remove any grease.

Using a hand sanding block of 150 grit, sand down the frames (outsides) of the cabinets. You need to sand off the top coat of whatever is sealing the original finish, but you don’t need to take off every bit of color from the wood. Use a short nap or mohair roller to paint the boxes with primer. I like Benjamin Moore Advance. Use a primer that is close to your finish color.

Once the primer is dry, use caulk to fill any seems and caps. Let that dry for at least an hour. Sand lightly with 200 grit sandpaper. Clean all the sanding dust and apply the paint with a mohair roller (and synthetic brush for crevices and corners). Follow manufacturer’s instructions for drying times.

In between coats of paint, sand very gently with 320 grit sandpaper. When you paint on the final coat, be careful not to overwork the paint. This will give you a gorgeous, super smooth finish.

Once your cabinet boxes are done, you can replace all your dishes and kitchen items and use your kitchen normally, while you’re working on your doors elsewhere. You’ll follow the same steps for painting the doors, but with extra attention to detail because they will take the greatest wear and tear, and will be the first thing people will notice.

To save yourself lots of time and exertion, use an electric palm sander for the flat surfaces of the doors, and just use your sanding block to get in all the nooks and crannies. It really is worth the time to sand well, so that the paint and primer can properly adhere to the wood. This is how you keep the nicks and scratches at bay.

Carefully remove any sanding dust from the doors, first with a vacuum, and then with a microfiber cloth dampened with rubbing alcohol. Do not use water, as it will raise the grain of the wood and interfere with a smooth finish.

Brush primer in the corners of the door panels. Then use the roller to apply primer to the flat surfaces.

Try to lay the doors flat for as long as possible to minimize drips. Once they are mostly dry, you can lean them up against the wall (not touching each other!) to finish drying. Use your caulk to fill in any gaps between the molding the flat surfaces of the doors. Sand lightly with 200 grit sandpaper and clean well.

Using your mohair roller, start painting from the lowest surface on the door, the inside panels.

Then use a synthetic brush to fill in the corner layers of molding. This is where you want to be careful not to overload your brush with paint, or you’ll end up with drips. Finally use the roller to paint the outside flat surfaces. You can also roll lightly over the already-painted edges to even out any drips or excess paint. Taking the time to do this right will really make a difference in the finished product.

Again, try to lay each cabinet door flat for as long as possible. Since this paint is self leveling and slow drying, having the door flat helps the paint do its job properly. Repeat the sanding (with 320 grit), cleaning and painting process one more time.

Finally, allow at least a couple of days drying time for the paint to cure. If you reattach the doors and drawers while the paint is still curing, it will stick together and may end up ripping off a patch when you next open that door.

Reattach your doors and drawers by matching up your “raffle tickets”. I like to put felt pads on the inside corners of the doors, just to keep them from banging on the cabinet frame. And voila! You have a brand new kitchen! And new respect for cabinet painters!

For the full tutorial with lots more pictures and tips, please check out the original blog post.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s